Lan Settings - Furuno FELCOM 250 Operator's Manual

6.1.4

LAN settings

The LAN Settings must be performed by the network manager.
How to set the LAN IP address
Click [Settings] in the menu bar, the [Network settings], [LAN] and [IP address] in the
sub-menu. The following screen appears.
Own IP address
IP address
Subnet mask
DHCP Server
Lease information button
DHCP
From
To
Apply button
Cancel button
Item
Enter the LAN IP Address (IPv4 Address). Factory
setting is [192.168.1.1.].
Select the LAN Subnet mask.
Go to the DCHP lease information screen.
Use: Use DHCP Server in the communication unit.
Unuse: Do not use DHCP Server.
Enter assigned commencement IP address (IPv4 ad-
dress). Factory setting is [192.168.1.10].
Enter assigned last IP address (IPv4 address). Facto-
ry setting is [192.168.1.254].
Click to apply settings. The screen shows "The Cm-
mUnt will restart automatically after this settings. Con-
tinue?" → [OK] button → "Completed. Please wait a
moment for restarting." displays → press the [OK]
button to close message → Equipment restarts.
Restore previous settings.
6. WEB FUNCTIONS
Description
6-9