Furuno FELCOM 250 Operator's Manual page 146

6. WEB FUNCTIONS
7. Select [Connect using a broadband connection that requires a user name and
password] then click the [Next] button.
8. Enter desired name (ex. FELCOM 500) in the [ISP name] box then click the [Next]
button. This is the name that will be given to the icon for PPPoE connection. If the
screen shown below appears, go to step 9. If the screen does not appear go to
step 10.
9. Select [Anyone's use] or [My use only] as applicable then click the [Next] button.
10. Enter PPPoE user name in the [User name] box.
11. Enter PPPoE password in the [Password] box.
12. Enter PPPoE password again in the [Confirm password] box.
6-32
You can make the new connection available to any user or only to yourself.
A connection that is created for your use only is saved in your user account and is not
available unless you are logged in.
Create this connection for:
Anyone's use
My use only