Furuno FELCOM 250 Operator's Manual page 122

6. WEB FUNCTIONS
How to set the automatic timeout function
The automatic timeout function automatically disconnects a voice call (with the excep-
tion of emergency call type 505) when the receiver is left unhung for the specified
number of minutes. This feature is useful for prevent unwanted charges because the
phone is left off hook.
1. Click [Settings] on the menu bar.
2. Click [PBX settings].
3. Click [Other setting] to show the [PBX settings/Other setting] window.
4. To enable the timeout feature, check [Enabled].
5. Enter the timeout (1-99 minutes) in the [Timeout] box.
6. Click the [Apply] button. The message "Setting Completed." appears.
7. Click the [OK] button to erase the message.
6-8