Contacts; How To Save To The Contact List - Furuno FELCOM 250 Operator's Manual

5. WEB SOFTWARE
5.4

Contacts

Like the handset, you can add, edit and delete contacts from Web software. Use the
Web software to save contacts to the Communication Unit or SIM card.
Communication Unit
SIM card
5.4.1

How to save to the Contact list

Save a contact name and number to the Contacts list as follows:
1. Click [Contacts] in the menu bar. The Contacts screen is displayed as shown be-
low. It takes approx. two minutes after powering on to display the list.
2. Click the [Add contact] button. The new contact screen is displayed as shown:
Mandatory
3. Input the name of the contact in the [Name] field.
Input in alphanumeric characters, or symbols (except ^, {, }, [, ] ~, |, and \). The
character limit depends on the type of media storage used. When you save a con-
tact (at step 5) the number of characters that you can input is shown with "MAX: *.*
4. Input the phone number in the [Number] field (Maximum 20 characters). Only
numbers and the characters (#, *, and +) are allowed.
5. Select where to save the address in the [Stored] field (CmmUnt: Communication
unit, SIM: SIM card.
6. Click the [Add] button.
When completed, the message "Completed." is displayed.
Note: The following messages display when there is an error:
• "Name is invalid": The entered name is not valid.
• "Number is invalid": The entered number is not valid.
• "Memory full. Can't register." The maximum amount of entries is exceeded.
7. Click the [OK] button.
5-6
Media
150 addresses
Different with SIM card type
Contact count / Maximum contact count
SIM: SIM card
CmmUnt: Communication unit
Total: SIM card + Communication unit
Maximum savable address count