Furuno FELCOM 250 Operator's Manual page 30

2. HANDSET OPERATIONS
Service
4kbps AMBE+2
(Standard quality)
3.1kHz Audio (High
quality)
2. Press the
below appears on the screen.
Note: If connection fails, the message "Can't connect" appears.
3. Complete the conversation.
During conversation, the duration of the communication time is counted and dis-
played on screen (in seconds).
4. Press the
tion of the call is indicated in the display for three seconds and the idle screen ap-
pears.
Note: To make a telephone call from land to the Inmarsat Terminal FELCOM 250/500,
dial the identification code of the telephone carrier, [870] (ocean area code) then the
Inmarsat number.
2-2
Charge
Low cost [1][*] + subscriber number
High cost [2][*] + subscriber number
key or press the Enter key to send the call. The indication shown
XXXXXXXXXXXXXX
XXXXXX
key or replace the handset in the cradle to end the call. The dura-
XXXXXX
Selection Method
Connection time
Display on
idle screen
Voice
Fax