Furuno FELCOM 250 Operator's Manual page 131

Group setting screen (User)
Click user on the group setting screen to show the User setting screen. Enter IP ad-
dress of handset and PC to enable data connection. If no IP address is entered, "D:
No permission" appears on the standby display of the handset and "Data connection
No permission" appears on the main display of the web software.
No. of entries/No. of entries available
User list
Item
Delete button
Add user button
IP address
Edit button
Entry screen/Edit screen
Entry screen
Item
Group Display group name.
User Enter, change IP address (127.0.0.1, 255.255.255.255; must be different
from IP address of communication unit).
Note: if the IP addresses are the same, only one group can be regis-
tered. "192.161.1." and "192.168.1.10" can be registered. * is a wildcard:
show network. If you registered two groups this way, the group having
the narrowest range (192.168.1.10) has priority.
Add button Register the information set. The group setting screen appears.
Save button Save the information. The group setting screen appears. During, change
is reflected the connection is reestablished.
Cancel but- Return to the group setting screen
ton
Description
Delete checked [ ] item. During PS, item is deleted af-
ter completion of PS.
Add user to group (maximum 20). Entry screen ap-
pears.
Show IP address of registered user.
Change user IP address. The edit screen appears.
Description
6. WEB FUNCTIONS
Edit screen
6-17