Status Monitor - Furuno FELCOM 250 Operator's Manual

5. WEB SOFTWARE
5.3

Status Monitor

The Status monitor displays satellite tracking status, communication status, ship po-
sition information, Communication Unit internal temperature, and error information.
Data is refreshed every five seconds. If the Status monitor is not displayed, do the fol-
lowing to view:
1. Click [Main] in the menu bar.
2. Click [Status monitor] in the sub menu. The [Status monitor] appears as shown:
Refer to the following table description of Status Monitor items:
Tracking status: Satellite tracking information
Satellite
Channel/Status
Satellite azimuth
Antenna elevation
Signal strength
Communication status: Communication information
Voice & Fax
5-4
Item
Name of Satellite that is being tracked.
Channel: Displays the searching or tracking channel
(Primary/Alternate).
• Primary: First global channel frequency
• Alternate: Second global channel frequency
Status: Displays satellite tracking status. Searching
(searching for satellite), Tuning (antenna fine tuning),
Tracking (tracking satellite), Blocking (satellite signal
is blocked).
Displays satellite bearing, North as reference.
Displays antenna elevation angle.
Displays signal reception level in the modem.
Display voice communication status.
--- (unavailable), Ready (Line is ready), Voice
(Phone in use), Fax (Fax in use), UDI
use), RDI
Description
*1
(ISDN RDI in use)
*1
(ISDN UDI in