7. Utility Mode
7.2
Utility Mode Setting Procedure
7.2.1
Procedure
1. Press the Utility key.
2. The Utility mode screen will appear.
7.2.2
Exiting
• Press the Panel Reset key.
7.2.3
Changing the Setting Values in Utility Mode Functions
• Select the appropriate item using [ ▲ / ▼ ] key, [ < / > ] key, or the 10-Key Pad.
• Select the setting value using [ ▲ / ▼ ] key, [ < / > ] key, or the 10-Key Pad.
1. Validate the selected setting value using the [Yes] key.
2. To go back to the previous screen, press the [No] key.
7.3
Setting in the Utility Mode
7.3.1
MACHINE SETTING
• MACHINE SETTING is used to set the operating environment.
A. AUTO PANEL RESET
Functions/Use
• To set the time it takes the Auto Panel Reset function, which resets the panel
Setting/Procedure • The default setting is "1" minute.
B. ENERGY SAVE MODE
Functions/Use
• To set the time it takes the machine to enter the Energy Saver mode after a copy
Setting/Procedure • The default setting is "15" minutes.
C. AUTO SHUT OFF
Functions/Use
• To set the time it takes the Auto Shut OFF function, which shuts down the
Setting/Procedure • The default setting is "OFF."
30
settings when the set period of time elapses after a copy cycle has been com-
pleted or the last key operated, to be activated.
OFF
ON : 0.5
"1"
2
cycle has been completed or the last key operated.
"15" min
(1 to 240)
machine when the set period of time elapses after a copy cycle has been com-
pleted or the last key operated, to be activated.
"OFF"
ON - Setting range : 15 to 240 min
Field Service Ver. 1.0 Apr. 2005
3
4
5 (min)