Table of Contents
Advertisement
Field Service Ver. 1.0 Apr. 2005
J. LEADING EDGE ERASE
Functions
• To adjust the erase width on the leading edge of the image by varying the laser
Use
• When the PH unit has been replaced
• When the user requests a smaller margin
Adjustment
Specification
Adjustment
To reduce the margin ........ Decrease the setting.
Instruction
To increase the margin ...... Increase the setting.
Adjustment
1. Enter Service's Choice in the Service mode.
Procedure
2. Select "LEADING EDGE ERASE" and press the [Yes] key.
3. Using [
4. Press the [Yes] key to validate the setting value selected in step 3.
K. TRAILING EDGE ERASE
Functions
• To adjust the erase width on the trailing edge of the image by varying the laser
Use
• When the PH unit has been replaced
• When the user requests a smaller margin
Adjustment
Specification
Adjustment
To reduce the margin........ Decrease the setting.
Instruction
To increase the margin...... Increase the setting.
Adjustment
1. Enter Service's Choice in the Service mode.
Procedure
2. Select "TRAILING EDGE ERASE".
3. Using [
4. Press the [Yes] key to validate the setting value selected in step 3.
emission timing.
A
4035D516AA
▲
▼
/
] key, select the desired setting value.
emission timing.
B
4035D517AA
▲
▼
/
] key, select the desired setting value.
8. Service Mode
• Specify the amount erased at the lead-
ing edge (width of A) of the paper.
Specifications
0 ± 2.0 mm
Setting Range
0 to 5 (1 increment = 1 mm)
The default setting is "4" mm
• Specify the amount erased at the trail-
ing edge (width of B) of the paper.
Specifications
0 ± 2.0 mm
Setting Range
0 to 5 (1 increment = 1 mm)
The default setting is "4" mm
63
Advertisement
Table of Contents
