Call Forwarding; Ringer Off - Siemens OpenStage 15 Administration Manual

administration.fm
Administration
Programmable Keys
3.6.3

Call Forwarding

This key function controls phone based call forwarding. If forwarding is enabled, the phone will
forward incoming calls to the predefined call number, depending on the current situation.
To use phone based call forwarding, Server features must be switched off (see Sec-
>
tion 3.5.7, "Server Based Features").
The label displayed to the left of the key is defined in Key label <key number>.
The Forwarding type parameter determines the forwarding behaviour. If "All calls" is selected,
any incoming call will be forwarded. If "On no reply" is set, the call will be forwarded when the
user has not answered within a specified timespan. The timespan is configured in the WBM
user pages under Configuration > Incoming calls > Forwarding > No replay delay (seconds). If
"On busy" is selected, incoming calls will be forwarded when the phone is busy.
Administration via WBM
System > Features > Program keys > Forwarding
3.6.4

Ringer Off

Turns off the ringtone. Incoming calls are indicated via LEDs and display only.
The label displayed to the left of the key is defined in Key label <key number>.
Administration via WBM
System > Features > Program keys > Ringer off
3-66
A31003-S2000-M102-2-76A9, 28/05/2009
OpenScape Voice - OpenStage Family, Administration Manual