Screensaver; Ftp/Https Access Data - Siemens OpenStage 15 Administration Manual

administration.fm
Administration
Transferring Phone Software, Application and Media Files
3.9.8

Screensaver

The screensaver is displayed when the phone is in idle mode. It performs a slide show consist-
ing of images which can be uploaded using the web interface.
Screensavers are available only on OpenStage 60/80 phones.
>
The file size for a screensaver image is limited to 300 KB. If the file is too large or
>
the contents of the file are not valid, the file will not be stored in the phone.
For screensaver images, the following specifications are valid:
• Data format: JPG or PNG. JPG is recommended.
• Screen format: 4:3. The images are resized to fit in the screen, so that images with a width/
height ratio differing from 4:3 will appear with deviant proportions.
• Resolution: The phone's screen resolution is the best choice for image resolution:
• OpenStage 60: 320x240
• OpenStage 80: 640x480
3.9.8.1

FTP/HTTPS Access Data

If the default FTP/HTTPS access settings (see Section 3.9.2, "Common FTP/HTTPS Settings")
are to be used, Use default must be set to "Yes", and only the Filename must be specified.
Data required (in every case)
• Use default: Specifies whether the default FTP/HTTPS access settings shall be used. Val-
ue range: "Yes", "No".
Default: "No".
• Filename: Specifies the file name of the phone software.
Data required (if not derived from Defaults)
• Download method: Selects the protocol to be used.
Value range: "FTP", "HTTPS".
Default: "FTP".
• FTP Server address: IP address or hostname of the FTP/HTTPS server in use.
• FTP Server port: Port number of the FTP/HTTPS server in use.
Default: 21.
• FTP account: Account at the server (if applicable).
• FTP username: User name for accessing the server.
3-106
A31003-S2000-M102-2-76A9, 28/05/2009
OpenScape Voice - OpenStage Family, Administration Manual