Administration; Access Via Local Phone - Siemens OpenStage 15 Administration Manual

3

Administration

This chapter describes the configuration of every parameter available on the OpenStage
phones. For access via the local phone menu, see the following; for access using the web in-
terface, please refer to Section 2.3.1, "Access the Web Interface (WBM)".
3.1

Access via Local Phone

The data entered in input fields is parsed and controlled by the phone. Thus, data is
>
accepted only if it complies to the value range.
1. Access the Administration Menu
OpenStage 60/80:
v
The key toggles between the Settings menu, the Applications menu, and the applica-
tions currently running. Press the
v
key toggles between the Settings menu, the Applications menu, and the applications
currently running.)
OpenStage 15/20/40:
Press the keys
2. Enter Password
When the Admin menu is active, you will be prompted to enter the administrator password.
The default admin password is "123456". It is highly recommended to change the pass-
word (see Section 3.13, "Password") after your first login.
For entering passwords with non-numeric characters, please consider the following:
By default, password entry is in numeric mode. For changing the mode, press the # key
once or repeatedly, depending on the desired character. The # key cycles around the input
modes as follows:
(Abc) -> (abc) -> (123) -> (ABC) -> back to start.
A31003-S2000-M102-2-76A9, 28/05/2009
OpenScape Voice - OpenStage Family, Administration Manual
v
D l i
, , and consecutively to select the administration menu.
key repeatedly until the "Settings" tab is active. (The
administration.fm
Administration
Access via Local Phone
3-1