Ftp/Https Access Data - Siemens OpenStage 15 Administration Manual

administration.fm
Administration
Transferring Phone Software, Application and Media Files
3.9.9.1

FTP/HTTPS Access Data

If the default FTP/HTTPS access settings (see Section 3.9.2, "Common FTP/HTTPS Settings")
are to be used, Use default must be set to "Yes", and only the Filename must be specified.
Data required (in every case)
• Use default: Specifies whether the default FTP/HTTPS access settings shall be used. Val-
ue range: "Yes", "No".
Default: "No".
• Filename: Specifies the file name of the phone software.
Data required (if not derived from Defaults)
• Download method: Selects the protocol to be used.
Value range: "FTP", "HTTPS".
Default: "FTP".
• FTP Server address: IP address or hostname of the FTP/HTTPS server in use.
• FTP Server port: Port number of the FTP/HTTPS server in use.
Default: 21.
• FTP account: Account at the server (if applicable).
• FTP username: User name for accessing the server.
• FTP password: Password corresponding to the user name.
• FTP path: Path of the directory containing the files.
• HTTPS base URL: IP address or hostname of the HTTPS server in use; only applicable if
Download method is switched to "HTTPS".
Administration via WBM
File transfer > Ringer file
3-110
A31003-S2000-M102-2-76A9, 28/05/2009
OpenScape Voice - OpenStage Family, Administration Manual