Handset Settings; Quick Access To Numbers; Changing The Display Language; Setting The Display/Screensaver - Siemens Gigaset C300 User Manual

Handset settings

Handset settings
Your handset is preset, but you can change
the settings to suit your individual require-
ments.

Quick access to numbers

You can assign a number from the directory
to each of the digit keys Q and 2 to O.
The number is then dialled by simply press-
ing a key.
Changing the display
language
You can view the display texts in different
languages.
¤ Settings ¤ Language
§Menu§
The current language is indicated by a
s
Select a language and press
If you accidentally choose a language you do
not understand:
¤ L4
§Menu§
s
Select the correct language and
§OK§
press
Setting the display/
screensaver
You have a choice of four colour schemes
and several different contrasts. You can also
set a screensaver and the backlight.
¤ Settings ¤ Display
§Menu§
You have the following options:
Screensaver
You can set a picture or the time to be dis-
played as a screensaver when the hand-
set is in idle status. This will replace the
idle status display. You can choose
between No Screensaver, Digital Clock
and Picture.
42
³
.
§OK§
.
The screensaver is not displayed in cer-
tain situations, e.g., during a call or if the
handset is de-registered.
To show the display in idle status, briefly
press end call key a.
Colour Schemes
You can set the display to be shown in
various colour combinations. Four colour
schemes are available.
Contrast
Nine contrast settings are available.
Backlight
Depending on whether or not the hand-
set is in the charger, you can activate or
deactivate the backlight (
activated, the display is permanently
dimmed.
When the display backlight is switched
off, any key press will activate the back-
light and perform the relevant key func-
tion.
Please note
.
If the backlight is turned on outside
the charging cradle, the standby time
for the handset is considerably
reduced!
Activating/deactivating auto
answer
If this function is activated, you can simply
lift the handset out of the charger without
having to press the talk key c when you
receive a call.
¤ Settings ¤ Telephony
§Menu§
¤ Auto Answer
§OK§
Press display key (
³
= on). If it is
³
= on).