Recording Radar Data; Radar Settings - Lowrance HDS Gen3 Operator's Manual

136
MARPA unavailable
•
Controls whether an alarm is activated if you do not have the
required inputs for MARPA to work (valid GPS position and
heading sensor connected to the radar server).
You can also set up a guard zone around your vessel and when a
target comes with in this zone, an alarm can be triggered. For more
information, refer to Marpa settings under "Radar settings" on page
136.

Recording radar data

You can record radar data and save the file internally in the HDS
Gen3 unit, or save it onto a microSD card inserted into the unit's
card reader.
A recorded radar file can be used for documenting an event or an
operational error. A logged radar file can also be used by the
simulator.

Radar settings

Radar symbology
You can select which optional radar items that should be turned
on/off collectively from the menu. Refer to the Radar panel
illustration.
Radar | HDS Gen3 Operator Manual