Lowrance HDS Gen3 Operator's Manual page 115

- If you reject this request, you can later start NAV mode from
the Autopilot Controller.
3.
Accept the required course change to activate NAV mode.
- If the course change is not accepted within 8 seconds, the
dialog is removed and the autopilot remains in the current
active mode.
After the autopilot is engaged in NAV mode, the Autopilot
Controller shows NAV steering options.
Restart
Restarts the navigation from the vessel's current position.
Cancel
Cancels active navigation and deselects the current route or
waypoint navigation. The autopilot is switched to AUTO mode,
steering the vessel on the heading that was active when the Cancel
button was selected.
Note:
Ú This is different from selecting Standby mode
which does not stop current navigation. From Standby
mode you can later restart the active route.
Skip
Skips the active waypoint and steers towards the next waypoint
when you are navigating a route.
Outboard motor autopilot | HDS Gen3 Operator Manual
115