1
Introduction
Operating the system
You can use both the keys and the touchscreen to operate the HDS
Gen3.
This manual uses the following general terminology to describe
operating the unit:
Select
•
Touch: Tap the panel
•
Key: Use the cursor keys to select, then confirm by pressing the
Enter key
Press and hold
•
Touch: Press and hold on the screen
•
Key: Use the cursor keys to select, then press and hold the
Enter key
Drag
•
Touch: Drag an item to a new position
•
Key: Use the cursor keys to select an item, confirm by pressing
the Enter key. Use the cursor keys to select a new position, and
then press the Enter key again to confirm the new position.
The front panel and keys
1
Touchscreen
Introduction
| HDS Gen3 Operator Manual
15