Overlay Data - Lowrance elite-4x Operation Manual

Overlay Data

Used to select data shown on the Sonar, Structure
and Chart pages.
Overlay data
Show
Enables/disables the display of overlay data,
allowing you to remove overlay data from the
screen without deleting the current overlay data
configuration.
Configure
Allows you to select/customize overlay data.
Pages | Elite X series
To add overlay data:
1. From the Sonar, Chart or DownScan
page, press MENU.
2. Select Overlay data and press ENTER.
3. Select Configure and press ENTER.
4. Press Menu and select Add. Press
ENTER.
5. Select a data category and press
ENTER.
6. Select the desired data and press
ENTER.
7. Press MENU and select Return to
Overlays. Press ENTER.
8. Press MENU, select Done Configuring
and press ENTER.
12