Autopilot Control Of The Trolling Motor; Anchor Mode; Heading Lock Mode - Lowrance HDS Gen3 Operator's Manual

you can select that the bar is off when the autopilot is in standby
mode. Refer to the "Autopilot settings" on page 104.

Autopilot control of the trolling motor

Selecting an Arrival mode
The autopilot switches from navigation mode to the selected arrival
mode when your vessel reaches the destination. Arrival mode is set
to Standby by default. Before starting a navigation mode or a turn
pattern, it is important to select an arrival mode that fits your
navigation needs. Refer to "Arrival mode" on page 105.

Anchor mode

Maintains your vessel position at a selected location.
Note:
Ú When in anchor mode, your vessel orientation can be
affected by wind or currents.
The following occurs when you select to anchor at:
Waypoint
•
Enables anchor mode when your vessel arrives at a selected
waypoint.
Cursor
•
Enables anchor mode when your vessel arrives at the cursor
position.
Here
•
Enables anchor mode at your current location.

Heading Lock mode

Locks and maintains the current vessel heading. Use the left and
right arrow buttons in the Autopilot Controller to make heading
adjustments. To make small heading adjustments, single-select the
left or right buttons. For larger adjustments, select and hold the left
or right buttons.
Standby mode
Cancels autopilot activity and returns the vessel to handheld remote
or foot pedal steering control.
Trolling motor autopilot | HDS Gen3 Operator Manual
101