Autopilot control location
Controls the location of the Autopilot controller on the panel.
Select active autopilot
Selects if the autopilot controls the trolling motor or the outboard
motor(s).
Auto hide autopilot bar
Controls whether the Autopilot information bar is shown when the
autopilot is in Standby mode.
Arrival mode
The trolling motor autopilot switches from navigation mode to the
selected arrival mode when your vessel reaches the destination.
Note:
Ú
Before starting a navigation mode or a turn pattern, it
is important to select an arrival mode that fits your
navigation needs.
Arrival modes are:
Standby
•
Cancels autopilot activity and returns the vessel to handheld
remote or foot pedal control.
Heading lock
•
Locks and maintains the last vessel heading.
Anchor
•
Anchors the vessel at the current destination.
Note:
Ú
We recommend only using heading lock in open
water.
Anchor point setup
Anchor points can be saved as a new waypoint, replaced with an
existing waypoint, or set as your current coordinates.
Trolling motor autopilot
| HDS Gen3 Operator Manual
105