Reset Fishing Mode - Lowrance HDS Gen3 Operator's Manual

Fishing mode
Ice Fishing

Reset fishing mode

Resets selected fishing mode to default settings, allowing you to
clear settings adjustments made while using a fishing mode.
Log sonar
Select to start and stop recording of Sonar data. For more
information, refer to "Start recording log data" on page 70.
This option is also available from the Advanced option in the Sonar
menu.
View Sonar log
Used to view Sonar recordings. The log file is displayed as a paused
image, and you control the scrolling and display from the menu.
You can use the cursor on the image, measure distance, and set
view options as on a live Sonar image. If more than one channel was
recorded in the selected Sonar file, you can select which channel to
display.
You exit the view function by selecting the X in the upper right
corner or by pressing the X key.
Installation
Used for installation and setup. See the separate HDS Gen3
Installation manual.
Sonar | HDS Gen3 Operator Manual
Depth
≤ 400 ft
Palette
Ice fishing
77