Lowrance HDS Gen3 Operator's Manual page 20

This manual does not include specific operation instructions for any
rd
3 party device. For features and functionality, refer to the
rd
documentation included with the 3 party device.
SmartCraft VesselView integration
SmartCraft data can be displayed and interaction are enabled
through the HDS Gen3 when a VesselView 7 or VesselView 4
gateway device is present on the network.
The engine supplier icon appears on the Home page when a
device is available.
FUSION-Link integration
The FUSION-Link devices appear as additional sources when using
the audio function. No additional icons are available.
Refer to "Audio" on page 146 for more information.
BEP CZone integration
The HDS Gen3 integrates with BEP's CZone system used for
controlling and monitoring a distributed power system on your
vessel.
The CZone icon is available in the Tools panel on the Home page
when a CZone system is available on the network.
A separate manual is provided with your CZone system. Refer to this
documentation and to the HDS Gen3 Installation manual for how to
install and configure the CZone system.
CZone dashboard
When the CZone is installed and configured, an additional CZone
dashboard is added to the Info panels.
You switch between a panel's dashboards by selecting the left and
right arrow symbols or by selecting the dashboard from the menu.
Editing a CZone dashboard
You can customize a CZone dashboard by changing the data for
each of the gauges. Available editing options depend on the type of
gauge and which data sources that are connected to your system.
For more information, refer to "Info panels" on page 94.
20
Introduction | HDS Gen3 Operator Manual