Wireless Connection; Connect And Disconnect From A Wireless Hotspot - Lowrance HDS Gen3 Operator's Manual

16
118

Wireless connection

GoFree wireless connectivity gives you the ability to:
• Use a wireless device to remotely view (smartphone and tablet)
and control the system (tablet only).
• Access the GoFree Shop.
• Upload your Sonar logs to create custom maps at Insight
Genesis.
• Download software updates
• Connect to third party applications
Note:
Ú Maps, charts, software updates, and other data files
can be large. Your data provider may charge you based on
the amount of data you transfer. If you are unsure contact
the service provider for information.
The HDS Gen3 includes:
• Built-in wireless functionality for connecting to the internet and
wireless devices such as smartphones and tablets.
Initial configuration and setup of the built-in wireless
functionality is described in the HDS Gen3 Installation Manual.
• Built-in Bluetooth wireless technology.
The built-in Bluetooth wireless technology gives you the ability
to connect the HDS Gen3 to Bluetooth enabled devices. For
more information, refer to "Bluetooth wireless technology" on page
120.
Configuration and setup of the built-in wireless functionality is
described in the HDS Gen3 Installation Manual.
Connect and disconnect from a wireless
hotspot
To connect to a wireless hotspot, select the Wireless option in the
System Controls dialog and then select Not Connected. This opens
the Wireless Devices dialog. Use this dialog to select the desired
hotspot, enter the login information and then select Connect.
Connecting to a wireless hotspot changes the wireless mode to
Client mode. In this mode you can access the GoFree Shop.
Wireless connection | HDS Gen3 Operator Manual