Lowrance HDS Gen3 Operator's Manual page 122

122
Connect to a wireless hotspot
Displays the Wireless device dialog that you can use to connect the
wireless functionality to a wireless hotspot.
Remote controllers
When a wireless device (smart phone or tablet) is connected, it
should appear in the Remote controllers list. Selecting 'Always allow'
means the device can automatically connect without needing a
password each time. This menu also allows you to disconnect
devices that no longer require access.
Wireless devices
Shows the internal wireless module and any connected WIFI-1
devices, as well as their IP and channel number. If a WIFI-1 is
connected and the system detects the software is out of date, an
option to update is also be displayed. WIFI-1 updates, when
required, are included with the display updates.
Select a device to view additional information about it. 'Network
Name' and 'Network Key' can be edited for security, and 'Channel'
can be changed if the connection to unit is compromised due to
interference. 'Mode' can be changed on WIFI-1 devices only. Restore
defaults returns the unit to factory settings.
Client settings
Displays information about the wireless hotspot your unit is
connected to or the last one your unit was connected to. You can
select the hotspot in the dialog to set it as a hotspot you want to
always connect to when in range or you can select to delete it.
Advanced
Initiates the Iperf and DHCP Probe tools that help in fault-finding
and setting up the wireless network.
Note:
Ú Iperf and DHCP Probe are tools provided for
diagnostic purposes by users familiar with network
terminology and configuration. Navico is not the original
developer of these tools, and does not provide support
related to their use.
Wireless connection | HDS Gen3 Operator Manual