Sam4s ER-260 SERIES Service Manual page 27

4-2 Disassembling the Case Lower Block
4-2-1 Ass'y Main PBA, Fiscal PBA and I/F PBA
1. Separate the ten harnesses( , ,
2. Lift up the PBA-MAIN PBA(E17) from the CASE LOWER(E24).(page6-8)
2. Lift up the ASS'Y FISCAL PBA(E27) from the CASE LOWER(E24).(page6-8)
3. Separate the harness (ⓗ) and Remove the screw(E12). (page6-8)
4. Lift up the I/F PBA(E13).(page6-8)
4-2-2 Ass'y Trans Power
1. Separate the harnesses( ,
2. Lift up the TRANS-POWER (E15) from the CASE LOWER(E24).(page6-8)
SAM4S ER-260 SERIES
ⓦ ⓑ ⓑ ⓑ ⓖ, , , , ⓤ ⓤ ⓤ ⓕor ,
, ,
ⓤ ⓟ) and Remove the two screws(E14). (page6-8)
ⓗ ⓗorⓨ) and remove the two screws(E16).
4. Disassembly and Assembly
4-3