3-2 Installation
3-2-2 Take-Up Spool Installation
※
If you wish to use the printer to print a sales journal, insert the paper into the paper take
Wind the paper two or three turns around the spool shaft and install the spool in the mount
1. If you use the ER-260 Series with 1-station, refer to below figure. (Fig 3-3 (F))
2. If you use the ER-260 Series with 2-stations, refer to below figure. (Fig 3-3 (G))
SAM4S ER-260 SERIES
Figure 3-3. Spool Installation
3. Installation and Operation
-up spool.
3-3