Update The Raid System Firmware - Accusys TShare A16T3-Share User Manual

5.7 Update the RAID System Firmware

Follow the steps in this section to update the firmware of your RAID system.
1. Note the current firmware version (System Code, Boot Code, Expander Code,
etc) from RAIDGuardX.
2. Download the latest firmware from website
www.accusys.com.tw/support/download.htm.
Caution
- Do NOT writing data, shutdown, interrupt RAID system during
updating, in order to avoid any damage.
- Firmware update time will take 2~5 minutes.
3. Select Controller in the Menu bar, move to Update > Update System Code in
drop menu.
4. Choose correct System Code file to start updating. During the update process,
the RAID system will stop all data access.
Caution
Do NOT interrupt or stop updates that are in progress. Firmware
update will take 2~5 minutes.
Once the update is complete, make sure to restart (power off / on) the RAID
5.
system to make new firmware available.
6. Repeat the steps to update other firmware
.