Adding Controller; Das - Add Controller Locally - Accusys ExaSAN User Manual

4.1.2 Adding Controller

RAIDGuardX can manage the RAID controller locally or remotely via intranet access.
Two configurations to add RAID controller into RAIDGuardX Client.
1) DAS - Click icon Add Controller in the main page of RAIDGuardX Client locally.
2) SAN - Clicking Manually Add Controller in controller tab to add remotely.
Following steps for add controller in detail;
1. Click Add Controller to display a list of available controllers on local and network.
2. Click on a controller and enter password, default is 00000000 (8 zeros). (you can assign a
name to the controller for remark)
3. Click Add to main page.
Note
To change the controller password, refer to Section MISC.
User Guide
(1) DAS – add controller locally
5. RAID