3.4 IP Commands
IP>help
Commands at IP level:
IP
Configuration
IP
Status
IP
Setup
[<ipaddress> [<ipmask> [<ipgateway>]]] [<vid>]
IP
Mode
[enable|disable]
IP
Ping
[-n <count>] [-w <timeout>] <ipaddress>
IP
Arp
IP
Dhcp
[enable|disable]
Configuration
___________________________________________________________________________________________________________________________________________________
IP>Configuration help
Syntax:
IP Configuration
Description:
Show IP configured IP address, mask, gateway, VLAN ID and mode.
IP>config
IP Configuration:
Address: 192.168.0.2
Subnet Mask: 255.255.255.0
Gateway: 192.168.0.1
VID: 0
Mode: enabled
dhcp: disabled
Status
___________________________________________________________________________________________________________________________________________________
IP>Status help
Syntax:
IP Status
-47-