Name
___________________________________________________________________________________________________________________________________________________
System>Name help
Syntax:
System Name [<name>]
Description:
Set or show the system name.
[<name>]: String of up to 16 characters (default: Show system name).
Reboot
___________________________________________________________________________________________________________________________________________________
System>Reboot help
Syntax:
System Reboot
Description:
Reboot the switch.
SNMP
___________________________________________________________________________________________________________________________________________________
System>SNMP help
Syntax:
SNMP [enable|disable]
Description:
Activate or deactivate the SNMP.
[enable|disable]: Enable/disable SNMP (default: Show SNMP mode).
Trap
___________________________________________________________________________________________________________________________________________________
System>Trap help
Syntax:
Trap [<IP Address>]
Description:
Set or show SNMP traps destination.
<IP Address>: IP address to send traps to. (default: Show trap configuration)
42