Table of Contents
Advertisement
RSTP Port Status
___________________________________________________________________________________________________________________________________________________
Port/Group
VLAN Id
Path Cost
Edge Port
P2p Port
Protocol
Port State
___________________________________________________________________________________________________________________________________________________
The above status example shows three STP operate in three different VLANs as follows:
VLAN 1 members: P1, P2, P3, P4, P5, P6, P7, P8
VLAN 2 members: P3, P4
VLAN 3 members: P7, P8
P3 PVID = VLAN 2
P4 PVID = VLAN 2
P7 PVID = VLAN 3
P8 PVID = VLAN 3
P3 and P4 connect to same switch as an STP redundant link associated to VLAN 2.
P7 and P8 connect to another switch as an STP redundant link associated to VLAN 3.
The switch supports STP over multiple VLANs. Each VLAN has individual STP mechanism operating
independently.
Description
Port number
The associated VLAN to which the RSTP port belongs (PVID)
The path cost of the RSTP port
Is the port an edge port?
Yes - The port operates in full duplex.
The protocol version configured for the port - RSTP or STP
Forwarding - A port receiving and sending data, normal operation. STP still monitors
incoming BPDUs that would indicate it should return to the blocking state to prevent
a loop.
Blocking - A port that would cause a switching loop, no user data is sent or received
but it may go into forwarding mode if the other links in use were to fail and the
spanning tree algorithm determines the port may transition to the forwarding state.
BPDU data is still received in blocking state.
Listening - The switch processes BPDUs and awaits possible new information that
would cause it to return to the blocking state.
Learning - While the port does not yet forward frames (packets) it does learn source
addresses from frames received and adds them to the filtering database (switching
database)
Non-STP - RSTP is disabled.
-104-
Advertisement
Table of Contents
