Managing The Switch; Ip Address & Password; Configuring Ip Address & Password Via Web Interface - KTI Networks KGS-2422 Installation Manual

3. Managing the Switch

The switch provides the following methods to configure and monitor the switch as follows:
Making out of band management via RS-232 console port
Making in-band management via telnet interface over TCP/IP network
Making in-band management via web interface over TCP/IP network
Making in-band SNMP management over TCP/IP network
3.1 IP Address & Password
The IP Address is an identification of the switch in a TCP/IP network. Each switch should be designated a new
and unique IP address in the network. The switch is shipped with the following factory default settings for
software management:
IP address of the switch: 192.168.0.2 / 255.255.255.0
Default
Fixed Username: admin
No password
The switch uses local authentication instead of RADIUS authentication with factory defaults. No password is
required with factory default. However, the password is used for local authentication in accessing to the switch
via console, telnet and Http web-based interface. For security reason, it is recommended to change the default
settings for the switch before deploying it to your network.
3.2 Configuring IP Address & Password via Web Interface
Start Web Browser
Start your browser software and enter the default IP address to which you want to connect. The IP address is
used as URL for the browser software to search the device.
URL:
Login to the switch
When browser software connects to the switch successfully, a Login screen is provided for you to login to the
device as the left display below:
http:/192.168.0.2/
-26-