Document Change History; Fips 140-2 Cryptography - Polycom HDX Systems Deployment Manual

Deployment Guide for Maximum Security
Environments

Document Change History

FIPS 140-2 Cryptography

Polycom, Inc.
This software, when configured per the guidance provided in this guide, is designed
to meet the latest U.S. Department of Defense (DoD) security requirements for
listing on the Unified Capabilities (UC) Approved Products List (APL) as maintained
by the Defense Information Systems Agency (DISA) Unified Capabilities
Connection Office (UCCO). For more information about the UC APL process, visit
the UCCO website http://www.disa.mil/Services/Network-Services/UCCO.
This document provides guidance for configuring and using software version
2.7.3.1_J to be consistent with the conditions for deployment as listed in the UC
APL listing for the Polycom HDX system product. For a listing of certified
software versions in addition to version 2.7.3.1_J, refer to
http://www.polycom.com/solutions/solutions-by-industry/us-federal-gov
ernment/certification-accreditation.html
In the configuration sections of this document, if a setting is mandated by a
DISA Security Technical Implementation Guide (STIG) requirement, the
specific STIG reference is listed along with the setting.
This information is required for listing on the US Department of Defense
(DoD) Unified Capabilities (UC) Approve Products List (APL):
Doc Version
1.0
To request information or submit comments about this document, please
contact Polycom Global Services.
The Polycom HDX system software uses OpenSSL FIPS Object Module
(Software Version: 1.2). This module provides FIPS-140-approved
cryptography for the system. The validation certificate for this module can be
found at
http://csrc.nist.gov/groups/STM/cmvp/documents/140-1/140val-all.htm
#1051
Release Date
February 2014
Description
Initial approved release
5