Polycom HDX Systems Deployment Manual page 13

Deployment Guide for Maximum Security Environments
Polycom, Inc.
Go to System > Admin Settings > General Settings > Security >
4
External Authentication to configure the Active Directory Server (ADS)
settings.
Go to System > Admin Settings > General Settings > Security >
5
Security Settings.
Any user account information entered during the setup wizard is not valid after
system restart. ADS is enabled by default in Maximum Security mode, which
disables the local user account.
Go to System > Admin Settings > General Settings > Security >
6
Security Settings >
Setting
AES Encryption
Allow Access to User
Settings
Configure the system for time and date management using the steps
7
appropriate for your particular Polycom HDX system model and
deployment type.
> and configure the following settings.
Description
Specifies whether to encrypt calls with other sites.
• Off — AES Encryption is disabled.
• When Available — Allows calls with all endpoints,
including sites that might not support encryption.
• Default: Required for Video Calls Only — Allows
video calls only with sites that support encryption.
ISDN voice and analog phone calls are allowed.
• Required for All Calls — Allows video calls only
with sites that support encryption. ISDN voice and
analog phone calls are not allowed.
Specifies whether the User Setting screen is
accessible to users through the System screen.
• Enable this setting if meeting passwords are
required to join multipoint calls.
• Disable this setting if meeting passwords are not
required for multipoint calls.
13