Account Management; Certificates, Revocation, And Whitelist - Polycom HDX Systems Deployment Manual

Deployment Guide for Maximum Security Environments
10

Account Management

Setting
Admin:
• Lock Account after Failed Logins
• Account Lock Duration in Minutes
User:
• Lock Account after Failed Logins
• Account Lock Duration in Minutes

Certificates, Revocation, and Whitelist

These settings can be configured only through the HDX system web interface.
Setting
Maximum Peer Certificate Chain
Depth
Always Validate Peer Certificates
from Browsers
Always Validate Peer Certificates
from Servers
Revocation Method
Allow Incomplete Revocation Checks
Whitelist
Only someone logged onto the system as an admin can configure remote
access on a system that is using the Maximum Security Profile.
Setting
Idle Session Timeout in Minutes
Maximum Number of Active Web
Sessions
Maximum Number of Sessions per
User (applies to local, web interface,
and serial port sessions)
Restriction
Set to 3, Off is not allowed.
Set to 1, configurable.
Set to 3, Off is not allowed.
Set to 1, configurable.
Restriction
Set to 2, configurable.
Enabled, not configurable.
Enabled, not configurable.
Configurable.
Disabled, configurable.
Enabled, configurable.
Restriction
Set to 10, configurable. Off is not allowed.
Set to 25, range is 10 to 50.
Set to 3, range is 1 to 5.
Polycom, Inc.