Table of Contents
Advertisement
3. System
Click
to access. In this page, we can configure the network settings, security
settings and some system preferences.
3.1 Network Preferences
3.1.1 LAN Settings
Items
Description
If this option is set as yes, TB200/400 will act as DHCP client to get an
available IP address from your local network. We don't recommend
DHCP
enabling this, as without the right IP address you cannot access
TB200/400.
By using SSH, you can log in to TB200/400 and run commands. It's
Enable SSH
disabled by default. We don't recommend enabling it if not needed.
The default port for SSH is 8022;
Hostname
Set the host name for TB200/400.
IP Address
Set the IP Address for TB200/400.
Subnet Mask
Set the subnet mask for TB200/400.
Gateway
Set the gateway for TB200/400.
Set the primary DNS for TB200/400.
Primary DNS
Secondary DNS
Set the secondary DNS for TB200/400.
IP Address2
Set the second IP Address for TB200/400.
Subnet Mask2
Set the second subnet mask for TB200/400.
Figure 3-1LAN Settings
Table 3-1 Description of LAN Settings
TB200/400 User Manual
13/39
Advertisement
Table of Contents
