MyPBX SOHO User Manual
2. System set up
2.1 Connection Drawing
PSTN
PSTN
FXO
IP
Route
FXS
LAN
601
602
Soft
IP
Normal
Figure 2-1
2.2 Connecting Ethernet Line
MyPBX provides two 10/100M Ethernet ports with RJ45 interface and LED
indicator. Plug Ethernet line into MyPBX's Ethernet port, and then connect
the other end of the Ethernet line with a hub, switch, router, LAN or WAN.
Once connected, check the status of the LED indicator. A yellow LED
indicates the port is in the connection process, and a green LED indicates the
port is properly connected.
2.3 Supplying Power
MyPBX utilizes the high-performance switch power supply, which supplies
the required power for the unit.
AC Input: 100~240V
DC Output: 12V, 1A
Please follow the steps below to connect the MyPBX unit to a power outlet:
www.yeastar.com
Page 6