2.1.2 BRI Status
On this page, you can check the status of BRI trunks. If there is no BRI module
inserted on TB400, you cannot see any BRI trunk here.
Status
OK
Disconnected
2.1.3 Network Status
In this page, the IP address of LAN port will appear with their status.If your VLAN or
VPN are configured, you can check the status in this page also.
2.1.4 System Info
In this page, you can check the hardware/firmware version, or the disk usage of
TB200/400.
Table 2-4 Description of SIP Account Status
Description
The BRI trunk is connected and configured correctly, trunk is
ready to use.
The BRI trunk is not connected or configured wrong.
Figure 2-1Network Status
Figure 2-2System Info
TB200/400 User Manual
10/39