Configure System Settings; Change Web Login Password; Change Date And Time - Yeastar Technology TG100 User Manual

Configure System Settings



Change Web Login Password



Change Date and Time

Upload Custom Prompts

Set up System Email

Update System Firmware

Backup and Restore

Reboot the System

Reset the System

Change Web Login Password
It is highly recommended that you change the system password after first login.
Procedure
1. Navigate to System > System Preferences > Password Settings.
2. Enter the old password first.
3. Enter a new password and retype the new password to confirm.
A strong password is comprised of letters, numbers, and characters.
4. Click Save, you will be automatically logged out.
Change Date and Time
You can adjust the time of TG gateway (including the time zone) to make it consistent
with your local time.
Procedure
1. Navigate to System > System Preferences > Date and Time.
2. Select your current and correct Time Zone.
3. (Optional) Enable the Daylight Saving Time if you need it in your place.
4. Select Automatically Synchronize With An Internet Time Server, and enter the
NTP Server address. The system will adjust its internal clock to a central network
server.
Note: Make sure the system can access the Internet.
5. You can also select Set Date & Time Manually and enter the date and time.
6. Click Save. A reboot prompt will display on the bottom of the web page.
TG100 User Guide
45/75