Yeastar Technology TB200 User Manual page 32

Items
Re-invite SDP Not Add T.38
Attributes
Error Correction
T.38 Max Bit Rate
6) Advanced Settings
Items
From Field
To Field
180 Ringing
Remote Party ID
Allow Guest
Pedantic
Alwaysauthreject
Figure 4-15 T.38
Table 4-10 Description of T.38 Settings
Description
If set to Yes, SDP in re-invite packet will not add T.38
attributes.
Re-invite SDP T38FaxUdpEc.
Set T38 Max Bit Rate.
Figure 4-16 Advanced Settings
Table 4-11 Description of Advanced Settings
Description
Where to get the caller ID in SIP packet.
Where to get the DID in SIP packet.
It is set when the telecom provider needs. Usually it is not
needed.
Whether to send Remote-Party-ID on SIP header or not.
Default: no.
Whether to allow anonymous registration extension or not.
Default: no. It's recommended that it is disabled for security
reason.
Enable pedantic parameter. Default: no.
If enabled, when TB200/400 rejects "Register" or "Invite"
packets,
using "SIP404 NOT FOUND". It's recommended that it is
enabled for security reason.
TB200/400 User Manual
TB200/400 always respond the packets
32/39