Ip Blacklist - Yeastar Technology TB200 User Manual

2) Common Rules
There is no default rule; you can create oneas required.
Items Description
A name for this rule, e.g. "HTTP".
Name
Simple description for this rule. E.g. accept the specific host to access
Description
the Web interface for configuration.
The protocols for this rule.
Protocol
Initial port should be on the left and end port should be on the right. The
Port
end port must be equal to or greater than start port.
The IP address for this rule. The format of IP address is: IP/mask
E.g. 192.168.5.100/255.255.255.255 for IP 192.168.5.100
IP
E.g.
192.168.5.255.
The format of MAC Address is XX:XX:XX:XX:XX:XX, X means 0~9 or
MAC Address
A~F in hex, the A~F are not case sensitive.
Accept: Accept the access from remote hosts.
Action Drop: Drop the access from remote hosts.
Ignore: Ignore the access.
Note: the MAC address will be changed when it's a remote device, so it will not be
working to filter using MAC for remote devices.

3.2.3 IP Blacklist

You can set some packets accept speed rules here. When an IP address which hasn't
been accepted in common rules sends packets faster than the allowed speed, it will
be set as ablack IP address and beblocked automatically.
Figure 3-6 Common Rules
Table 3-5 Description of Common Rules
192.168.5.0/255.255.255.0
TB200/400 User Manual
for IP from 192.168.5.0to
17/39