Memorizing A Dsp Mode - Sony CDP-991 Operating Instructions Manual

Memorizing a DSP (Digital Signal Processor) Mode
The DSP modes, can be stored in memory to correspond with a certain disc. By
making a DSP file, you can insert of select a disc and have it played to a
pre-selected acoustic atmosphere.
Making a DSP File
1 Select the desired DSP mode.
(see page 14)
2 Press FILE during the DSP indicator is lighting.
FLAT also can be memorized.
FILE
Light up except for FLAT.
7 ee) [1/2] 3[4|5
- 6{7|s/s|t
Lights up
Playing the disc using the DSP file
Each time a disc is inserted into the player, the designated
OSP mode will automatically set to play.
To change DSP mode without erasing the DSP file.
Change the DSP mode as you want and play. press FILE
RECALL.
The preceding DSP mode will be set.
To change DSP files.
Select a new DSP mode. Press FILE during the DSP
indicator is lighting. The new DSP mode will be stored in
the DSP file.
40
Clearing a DSP File
1 Insert the disc whose DSP mode to be cleared
in the tray.
2 Press DSP/1-20 (or SELECT on the remote
commander).
The DSP indicator lights up.
3 Press ERASE during the DSP indicator is
lighting.
TuBTOM FILE
When "FILE ERASE" is displayed and DSP"
disappears, the DSP file is cleared. The DSP mode
is also cleared automatically.
Note
The effect level setting cannot be stored.