Table of Contents
Advertisement
Remove the screw @ used in step 5).
Loosen the screw on the mirror positioning
tool (FY9-3002-000), and extend the arm @
fully.
Figure 4-208D
9) Install the mirror positioning tool 0 between
the No. 1 mirror mount and the No. 2 mirror
mount; and insert the pin @ that comes with
the mirror positioning tool.
10) Install the metal fixing @J of the scanner cable
CANON CLClOW REV.1 MAY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
4. MECHANICAL SYSTEM -
Figure 4-21 OD
to the No. 1 mirror mount using the hole in the
side plate with two screws @I.
Figure 4-211 D
Figure 4-212D
Advertisement
Table of Contents
