Canon CLC1000 Service Manual page 384

Removing the Primary Exhaust
Fan (FM6)
Removing the Filter
Remove the two screws @I, and remove the
filter cover @ of the rear cover 1.
Figure 4-108C
2) Remove the ozone filter 0.
Q
3
Figure 4-l 0%
Removing the Primary Exhaust
Remove the rear cover 1,
Remove the screw 0, and open the DC con-
troller PCB.
Disconnect the connector 0, and remove the
3)
two screws 0; then, draw out the fan assem-
bly 0.
Figure 4-11 OC
Remove the three screws 0, and remove the
4)
fan 0.
Flgure 4-111 C
CANON CLCIOOO REV.1 MAY lQQ7 PRINTED IN JAPAN (IMPRIME AU JAPDN)
Fan