Table of Contents
Advertisement
ADJUST
Item
RFADJ-RX
Adjusts registration (with RF in use).
RFADJ-RY
Corrects registration when originals are picked up
RFADJ-DX
from the RF.
RFADJ-DY
Corrects in relation to main scanning direction+CCD
read start position.
Corrects in relation to sub scanning direction+original
read start timing.
(Note 1)
RX + For correction in sub scanning direction when
RY + For correction in main scanning direction when
DX + For correction in sub scanning direction when
DY + For correction in main scanning direction when
Note 1:
You must enter the appropriate value whenever you have replaced a PCB or initialized a RAM; record
any new values on the service label for this purpose.
ED/RF
x.x
x.x
x.x mm
X
x.x mm
Description
pick-up is from the RDF tray.
pick-up is from the RDF tray.
pick-up is from the manual feeding tray (feeding
assembly).
pick-up is from the manual feeding tray (feeding
assembly).
DX
o-99 '
CANON CM1000 REV.1 MAY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
3. OPERATIONS AND TIMING -
m m
mm
Settings/remarks
Unit:
RX,
mm
RY, DY=O.OGmm
Initial value
RX, DX=O
For this mode, you must
have finished:
1. Adjusting the original
stop position and
2. Adjusting the horizon-
tal registration.
3-251
Advertisement
Table of Contents
