Canon CLC1000 Service Manual page 392

Remove the five screws 0, and disconnect
6)
the connector @; then, remove the pick-up
drive assembly 0.
Figure 4-205C
4-14
3.
Removing the Pick-Up Motor
Remove the pick-up drive assembly.
Loosen the three screws 0, and shift the ten-
sion roller 0; then, detach the timing belt @
from the pulley 0.
Remove the four screws 0, grip ring 0, and
pulley 0; then, remove the pick-up motor.
Figure 4-206C
CANON CLClOOO REV.1 MAY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
6