Canon CLC1000 Service Manual page 284

9. FEED-ADJ (image position adjustment)
ADJUST
Item
Adjusts the image write start position in main scan-
UP-ADJ
ning direction when pick-up is from the upper cas-
sette.
Adjusts the image write start position in main scan-
LOW-ADJ
ning direction when pick-up is from the lower cassette.
Adjusts the image write position in main scanning
direction when pick-up is from the multifeeder.
Adjusts the image write start position in main scan-
DECK-ADJ
ning direction when pick-up is from the paper deck.
(only if deck is
connected)
Adjusts the image write start position in main scan-
REFE-ADJ
ning direction for re-pick up operation.
Adjusts the image write start position in sub scanning
VSYC-ADJ
direction.
FEED-ADJ <s>
Description
CANON CLClOOO REV.1 MAY 1097 PRINTED IN JAPAN (IMPRIME AU JAPON)
Remarks
A higher value leads to a
movement to the rear.
Front
Unit: 0.11 mm
Standard: 128
Settings: 0 to 255
A higher value leads to a
movement to the trailing
edge.
Unit: 0.11 mm
Standard: 128
Settings: 0 to 255