Canon CLC1000 Service Manual page 293

14. HV-EL (fine-adjustment for internal static eliminator high-voltage outnut
according to conditions)
ADJUST
Item
B O D Y "C Indicates the machine internal temperature measured
by the environment sensor.
BODY % Indicates the machine internal humidity measured by
the environment sensor.
Indicates the machine internal humidity absolute value
BODY g
(g) measured by the environment sensor.
EL-OFST Adjusts the transfer high-voltage output.
ZONE A/B/C Indicates the machine internal humidity absolute value
(g) in the three ranges of A through C.
1:
Note
The setting of this item will return to the default value when the PCB is replaced or the RAM is
cleared, requiring input once again. Be sure to record any new setting you have made on the service
label.
3-266
HV-EL
x x x Oc
B O D Y
BODY
BODY
Description
ZONE A
ZONE B
Z O N E C 18.Og to -----g see 414
CANON CLClOOO REV.1 MAY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
READY
Remarks
Same as the reading
under 'DISPLAY' +
'ANALOG'.
Settings: -5 to +1
Unit: 0.5 kV
Standard: 0