Table of Contents
Advertisement
1. R-OPT (reader-related machine settings)
Item
P-SIZE
(Note 1)
METAL
(Note 1)
CONTROL (Note 1)
DF-AUTO
(Note 1)
MANAGE
Note
You must enter the appropriate value whenever you have replaced reader controller PCB or initial-
ized a RAM; record any new values on the service label for this purpose.
projector used by the user.
3-304
R-OPT
Description
Identifies the size of copy paper and trans-
Determines whether to use or not metal mode
in user mode.
Reserved
Enables or disables auto start for manual pick-
up in the RF.
0: Disable auto start.
1: Enable auto start.
Use it to bring the hues closer to those of pro-
fessional printing.
0: Standard
1: Professional printing
If 'MANAGE' is set to 'I', the Pro Print key will
be indicated on the user mode-screen.
a reflecting Q& or a tra&&ng.typk. It k&to lowei the'oow' '*
either
CANON CLClOOO REV.1 MAY 1897 PRINTED IN JAPAN (IMPRIME AU
< F >
Remarks
0: AB-configuration
1: Inch-configuration
2: A-configuration
3: All
0
Standard:
0:
Not available
1: Available
Standard: 1
standard: 0
For fine-adjustment, see
the descriptions for
TBL-M/C/Y/K'.
Of ';:
Advertisement
Table of Contents
