Table of Contents
Advertisement
2. P-OPT (cleaning mode)
OPTION
Item
T-WEB
(Note 1)
TBLT-POS
(Note 1)
F-WEB-MD
F-WEB
(Note 1)
CONTSET
(Note 1)
Note 1:
The value will return to the standard value when the RAM is initialized, requiring re-input. Be
record any new value on the service label.
CANONINC.
Description
Changes the frequency at which the transfer
belt cleaning web turns on.
Changes the stop position of the transfer belt.
Changes the ON/OFF sequence of the web
solenoid when the fixing web solenoid is turned
on.
At present, the setting is always '1'.
Changes the frequency at which the fixing web
solenoid turns on; once for n of small-size
copies.
Use it to set the copy count at which copy count
should start.
For instance, if set to 'loo', the counter 3 will
start to count in response to a press on the
Copy Start key as long as the copy count is set
to '100' or higher.
Remarks
Settings: l-5
Unit:
Standard: 3
Settings: -2-2
Unit: 2 mm
Standard: 0
Standard: 1
Settings: l-255
Standard: 8
Settings: O-999
Standard: 100
The setting is effective
only if DISPlAY+VER-
(111).
Advertisement
Table of Contents
